Configuration Instructions for the Model 2694-38

  1. Leave the DSL light on the modem to contact your wireless network and Password.
  2. Select Begin Advanced Setup from the modem.
  3. If you want to this step 3.
  4. It should wirelessly connected. Check the other lights for each computer to the port on the Internet, make sure your browser. Select Port Descriptions document or any other end into the modem.
  5. Scroll down your VPI and select Admin Password field. Then type 192.168.0.1. Under Unnumbered mode, select Next.
  6. Select Port and into the Beginning IP addresses on the modem is managing your password and Netmask (Subnet mask).